 > FGBB User Support > Setting/MacOSX 10.5.x
FGBB User Support
MacOS X 10.5.X
1．Select "System Preferences" from  Dock or  Apple Manu on the upper left and click the "Network" icon of "Internet and Network". |
 |
2．Click "Edit Locations" from Locations.
If you already have set up connections, select the existing settings. |
 |
3．Click  on "Network" displayed and enter an arbitrary name.
When you finish entering, click "Done". |
 |
4．Now, it will back to "Network ".
Select the arbitrary name you set in "Locations".
Select "Ethernet" on the left and click "Apply".
|
 |
|
5．When the screen displayed is renewed, check the contents.
"Status" : Connected
※When a status other than "Connected" is displayed, check cabling.
After checking, click "Advanced" |
 |
6．Click the "TCP/IP" tab  and set the followings.
"Configure IPv4:" : "Using DHCP"
"IP address :" : Check if IP address is updated
"Subnet Mask :" Check if it is "255.255.255.0"
"DHCP Client ID :" Blank
※When "IP Address" is not displayed correctly, please try to click "Renew DHCP Lease"
|
 |
7．Click the "Proxies" tab  and set followings
"Configure Proxies: ": "Manually"
"Select a protocol to configure: ", "Exclude simple hostnames: "; Check if all are unticked
"Web Proxy Server: ": Blank
"Bypass proxy settings for these Hosts & Domains: ": Blank
When it is automatically displayed, do not change the settings.
Use Passive FTP Mode (PASV): Tick
|
 |
8．Click the "Ethernet" tab  , select "Automatically" in "Configure: " and click "OK".
Now, back to "Locations". Click "Apply" and close.
Now, settings are completed. |
 |
 |
|